Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
; kasahara, Naoto; ; ; Kamide, Hideki
JNC TN9400 2000-010, 168 Pages, 2000/02
JNC-TN9400-2000-010.pdf:8.78MB
Thermal striping is significant issue of the structural integrity, where the hot and cold fluids give high cycle fatigue to the structure through the thermal stress resulted from the time change of temperatur distibution in the structure. In the sodium cooled fast reactor, temperature change in fluid easily transfers to the structure because of the high thermal conductivity of the sodium. It means that we have to take care of thermal striping, The thermal striping is complex phenomena between the fluid and structure engineering fields. The investigations of thermal striping are not enough to evaluate the integrity directly. That is the fluctuation intensity at the structure surface is assumed to be temperature difference between source fluids (upstream to the mixing region) as the maximum value in the design. 0therwise, the design conditions are defined by using a mockup experiment and large margin of temperature fluctuation intensity. Furthermore, such evaluation manners have not yet been considered as a design rule. Transfer mechanism of temperature fluctuation from fluid to structure has been investigated by the authors on the view points of the fluid and structure. Attenuation of temperature fluctuation was recognized as a dominant factor of thermal fatigue. We have devdoped a numerical analysis system which can evaluate thermal fatigue and crack growth with consideration of the attenuation of temperature fluctuation in fluid, heat transfer, and structure. This system was applied to a real reactor and the applicability was confirmed. Further verification is planned to generalize the system. For the higher cost performance of the fast reactor, an evaluation rule is needed, which can estimate thermal loading with attenuation and can be applied to the design. An idea of the rule is proposed here. Two methods should be prepared; one is a precise evaluation method where mechanism of attenuation is modeled, and the other is simple evaluation method where ...
Yang Zumao*;
JNC TN9400 2000-009, 81 Pages, 2000/02
JNC-TN9400-2000-009.pdf:47.3MB
It is important to study thermal stratification and striping phenomena for they can induce thermal fatigue failure of structures. This presentation uses the AQUA code, which has been developed in Japan Nuclear Cycle Development Institute (JNC), to investigate the characteristics of these thermal phenomena in water, liquid sodium, liquid lead and carbon dioxide gas. There are altogether eight calculated cases with same Richardson number and initial inlet hot velocity in thermal stratification calculations, in which four cases have same velocity difference between inlet hot and cold fluid, the other four cases with same temperature difference. The calculated results show : (1) The fluid's properties and initial conditions have considerable effects on thermal stratification, which is decided by the combination of such as thermal conduction, viscous dissipation and buoyant force, etc., and (2) The gas has distinctive thermal stratification characteristics from those of liquid because for
Research Committee on Reactor Physics;
JAERI-M 93-033, 246 Pages, 1993/03
no abstracts in English
Izumi, Fumio; ; Kobayashi, Kensuke
JAERI-M 90-218, 67 Pages, 1990/12
no abstracts in English
; Nakakawa, Masayuki; Mori, Takamasa; Kugo, Teruhiko; *
JAERI-M 90-177, 96 Pages, 1990/10
no abstracts in English